Four Serrated Pronged T Nuts Stainless Steel M10 X 15 for Furniture
Description
Hardware Nuts Bolts
Four Serrated Pronged T Nuts Stainless Steel M10 X 15 for Furniture
Stainless steel T nuts with M10 threaded cylinder hole , flat round head with four serrated prongs that are shorter then the length of cylinder section for biting material .
▲ Serrated prongs with good resistant loose
▲ High tensile strength
▲ Perfect corrosion resistance
▲ No burrs
| D2 | H | T | H1 | D1 | D3 |
| M10 | 12 | 1.8 | 10.2 | 12 | 25 |
Stainless steel T nuts are more hard and used for loading heavy duty
Chemical Elements for Stainless steel T nuts
| C | Si | Mn | S | P | N | Cr | Ni |
| 0.07 | 0.06 | 2 | 0.025 | 0.04 | 0.1 | 19 | 10.5 |
T nuts Physical Performance
| Tensile strength σb (MPa) | 535 |
| Yield Strength σs (MPa) | 210 |
| Elongation δ5 (%) | 50 |
| Reduction of area ψ (%) | 65 |
| Density g/cm3) | 7.93 |
Finishing
Generally , stainless steel T nuts are not need to be plated more as itself with good corrosion resistance , if you want more good corrosion resistance and nice appearance , following finishing can help you ..
| Description | Colors | Thickness | Charicteristic |
| Zinc | Blue ,White ,Black ,Yellow | 5-107μm | Bright and smooth surface ,corrosion resistance |
| Nickel | Silver | 1～3μm | Wear resistance ,bright appearance , anti-corrosion |
| Polishing | Silver | 0.01mm ( reference ) | Improving brightness of surface |
| Tin | Silver | 0.13～1.27μm | Good ductility ,corrosion resistance ,lower melting point ,eco-friendly ,brightness |
| Chrome | Silver white | 0．25～0．5μm | Harden surface ,Bright surface ,Heat resistance ,Wear resistance Corrosion resistance and eco-friendly
|
Installation
Operate T nuts are very simple , you just prepare a hammer , screw or bolt and electric drill etc tools . and now you can proceed installation .
Step 1
Drill full hole on material that diameter is same as the cylinder diameter of t nut , the hole depth as the length of cylinder T nut .
Step 2
Insert cylinder of t nut into hole and strike T nut in a hammer to drive it into material and four prongs bite into material .
Step 3
Put threaded screw or bolt through object and then into t nut from opposite side .
Step 4
Rotate screw or bolt or a attached nut to fasten object on material .
Stainless steel 304 Tuts